51.2 V systems

Home storage battery packs

LiFePO4 packs for residential storage, from module assembly and busbar welding to a finished cabinet with a BMS interface matched to the inverter.

Project constraints

01
The BMS protocol has to match the inverter, or the site cannot commission the system.
02
Cabinet access is decided by the room, not the datasheet.
03
Buyers compare usable capacity and module serviceability, not only nameplate figures.

Solution composition

Pack assembly

Prismatic LiFePO4 modules are assembled and busbar welded on the same benches used for cylindrical packs, with insulation and torque checks recorded.

Floor-standing, stacked, wheeled and wall formats are built around the installation room, with front service access where the site requires it.

CAN and RS485 interfaces are quoted against the inverter model, with a point list supplied so commissioning is not a trial-and-error process.

Holding frames that set cell pitch before welding

51.2 V 600 Ah LiFePO4 cabinet for home and small commercial sites

51.2 V 314 Ah stackable modules with Bluetooth monitoring

51.2 V 200 Ah wheeled cabinet for retrofit installations

Related delivery

Middle East

Residential storage cabinets for a distributor

51.2 V LiFePO4 cabinets in two capacities, supplied with inverter pairing sheets and installation drawings.

Delivery documents

Inquiry for Home storage battery packs